高功率光纤激光器光纤器件封装应力影响研究

高功率激光器无源器件制作过程中封装不当引入的应力,会导致信号光光束质量劣化和光纤温升,为了解决此问题,理论分析了光纤形变对信号光模式分布的影响,利用有限元方法建立包层光导致光纤发热模型,实验研究了不同封装方式对光纤发热情况和信号光光束质量的影响。实验表明,应力导致的光纤形变会造成信号光M2值在受力方向上略微变小而其垂直方向上变大,在输出100 W信号光时,施加应力导致的M2值的变化最高为0.39,与仿真结果相符。在光纤温升方面,相比于使用硬质胶水带来的12 ℃温升,使用硅橡胶封装的剥离器将温升控制在5 ℃以内,且其封装应力引入的M2值的变化在0.05以内。     

非晶Fe粉掺杂Al-12Si合金的高温压缩变形行为

为提高Al-12Si合金的热变形抗力,并探索非晶Fe粉掺杂对Al-12Si合金热压缩行为的影响和掺杂非晶Fe粉热压缩中的晶化温度等,采用连续挤压技术制备了掺杂10wt%非晶Fe粉与不掺杂非晶Fe粉的Al-12Si合金试样,对试样进行了不同温度和应变速率下的热压缩试验,分析了试样在热压缩中的组织转变,以及采用双曲正弦关系构建了试样的热流变应力方程。结果表明:非晶Fe掺杂试样在450 ℃及以下的热压缩时,Fe维持非晶态,500 ℃时,则已发生晶化;掺杂10wt%非晶Fe粉使Al-12Si合金的热抗变形能力显著提高,其热压缩激活能Q=211.29 kJ/mol,比未掺杂非晶Fe粉的Al-12Si合金试样高40.78 kJ/mol,且热压缩过程中存在动态回复和动态再结晶;利用双曲正弦关系构建试样的热流变应力方程为ε·=4.42×10¹⁴[sinh(0.016 6σ)]^6.13exp(-211 290/RT),线性回归系数高达0.99,即可为非晶Fe粉掺杂试样的热加工提供一定的理论指导。     

无扩口导管拧紧力矩对其密封性能的影响

以某型飞机中无扩口液压导管为研究对象,结合飞机液压导管实际安装以及保压工况,利用有限元软件ANSYS中多线性随动强化来模拟导管弹塑性本构模型;对处于不同安装力矩以及恒定压力下的导管连接件进行仿真分析,研究安装力矩对导管管接头处的应力应变以及密封性能的影响,并给出参考安装力矩。构建液压导管安装试验台,利用力矩扳手采集拧紧力矩值并使用液压油车对导管进行加压试验,验证不同安装力矩对导管管接头密封性能的影响。结果表明:导管与卡套之间的胀形区域产生的大变形以及应力集中是引起导管管接头渗漏的主要原因之一;所提出的密封性能仿真方法可以较为准确地模拟拧紧力矩与密封性能的关系,为实际工程中导管安装提供依据。     

基于ANSYS的带簧油封径向力分析

提出一种考虑弹簧初应力的油封径向力有限元计算方法,即通过二维轴对称模型实现带簧油封的径向力计算。该模型中通过圆管来等效油封弹簧,并可以实现弹簧初应力现象的模拟;圆管模型的材料属性由2种状态下(弹簧装配在油封上和油封装配在轴上)弹簧的拉力转换得到,转换关系通过试验与仿真相结合的办法获得,最终实现了带簧油封2种状态下的径向力有限元计算。通过径向力测量仪验证计算结果的正确性,同时发现弹簧所产生的径向力并非百分之百转化为油封径向力。     

锤击法在消除熔丝积材残余应力中的研究进展

锤击法在熔丝积材残余应力消除中具有非常重要的研究价值和学术意义。近年来该方法日趋完善,现已成为消除熔丝积材残余应力的重要方法之一。本文概括综述了消除残余应力的方法,并着重分析了锤击法消除残余应力的国内外研究现状和最新进展。希望能给相关工作者提供参考。     

A model of splats deposition state and wear resistance of WC-10Co4Cr coating

In this research both low temperature high velocity oxygen-fuel flame (LT-HVOF) and high velocity oxygen-fuel flame (HVOF) techniques were employed to prepare WC-10Co4Cr splats and coatings. In situ cutting of WC-10Co-4Cr splats was carried out with focused ion beam (FIB), and a model was proposed to describe how the wear resistance of WC-10Co4Cr coatings was correlated with its residual stress state and the splats deposition state. It was observed that in LT-HVOF spraying process, WC-10Co4Cr splats were slightly melted showing "hill" shape, while in HVOF spraying process, the splats were half melted having the appearance of "concavity". The residual stress of WC-10Co4Cr coatings is determined by the size, melting state, flight speed and temperature gradient of splats. In this paper, the quantitative function formula involving heating temperature and the flight speed of the powder is put forward for the first time to predict the wear resistance of the WC-10Co4Cr coatings. This will provide a theoretical basis for engineering practice and an effective way to save costs.     

Hybrid fully convolutional networks-based skin lesion segmentation and melanoma detection using deep feature

Fully convolutional networks (FCNs) take the input of arbitrary size and produce correspondingly sized output with efficient inference and learning. The automatic diagnosis of melanoma is very essential for reducing the mortality rate by identifying the disease in earlier stages. A two-stage framework is used for implementing the melanoma detection, segmentation of skin lesion, and identification of melanoma lesions. Two FCNs based on VGG-16 and GoogLeNet are incorporated for improving the segmentation accuracy. A hybrid framework is used for incorporating these two FCNs. The classification is done by extracting the feature from segmented lesion by using deep residual network and a hand-crafted feature. Classification is done by support vector machine. The performance analysis of our framework gives a promising accuracy, that is, 0.8892 for classification in ISBI 2016 dataset and 0.853 for ISIC 2017 dataset.